]> pilppa.com Git - linux-2.6-omap-h63xx.git/commit
[POWERPC] 85xx: mpc8568mds - update dts to be able to use UCCs
authorAnton Vorontsov <avorontsov@ru.mvista.com>
Fri, 5 Oct 2007 17:46:53 +0000 (21:46 +0400)
committerKumar Gala <galak@kernel.crashing.org>
Mon, 8 Oct 2007 13:39:04 +0000 (08:39 -0500)
commitaf6521ea8af210fea094b183a9ad29ab73945ee1
tree99bf729690cc43a0613ab4990a974534fa929595
parent321872dcc07f83f9b60af1be41c6bafbaddf9bf6
[POWERPC] 85xx: mpc8568mds - update dts to be able to use UCCs

1. UCC1's RX_DV pin is 16, not 15;
2. UCC1's phy is at 0x7, not 0x1. Schematics says 0x7, and recent
   u-boot also using 0x7.
3. Use gianfar's (eTSEC) mdio bus. This is hardware default setup.
4. tx-clock should be CLK16 (GE125, PB31);
5. phy-connection-type is RGMII-ID;

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/mpc8568mds.dts