]> pilppa.com Git - linux-2.6-omap-h63xx.git/commit
rt2x00: Fix rt2400pci signal
authorIvo van Doorn <ivdoorn@gmail.com>
Sun, 9 Mar 2008 21:49:04 +0000 (22:49 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Thu, 13 Mar 2008 23:32:31 +0000 (19:32 -0400)
commit89993890aeb8fe58b2d49b2661965524802ab73c
treed541a26a8a370401ef2c4d0cafdd8868853ed127
parentdac37d720860bbbc535adc90249184308501c1f0
rt2x00: Fix rt2400pci signal

After sampling hundreds of RX frame descriptors,
the results were conclusive:
- The Ralink documentation regarding the SIGNAL and RSSI are wrong.

It turns out that of the 5 BBR registers, we should not use BBR0 and BBR1
for SIGNAL and RSSI respectively, but actually BBR1 and BBR2.
BBR0 does show values, but the exact meaning remains unclear,
but they cannot be translated into a SIGNAL or RSSI field.
BBR3, BBR4 and BBR5 are always 0, so their meaning is unknown.

As it turns out, the reported SIGNAL is the PLCP value, this
in contradiction to what was expected looking at rt2500pci which
only reported the PLCP values for OFDM rates and bitrate values
for CCK rates.

This means we should let the driver raise the flag about the contents
of the SIGNAL field so rt2x00lib can always do the right thing based
on what the driver reports.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rt2x00/rt2400pci.c
drivers/net/wireless/rt2x00/rt2400pci.h
drivers/net/wireless/rt2x00/rt2500pci.c
drivers/net/wireless/rt2x00/rt2500usb.c
drivers/net/wireless/rt2x00/rt2x00dev.c
drivers/net/wireless/rt2x00/rt2x00queue.h
drivers/net/wireless/rt2x00/rt61pci.c
drivers/net/wireless/rt2x00/rt73usb.c