]> pilppa.com Git - linux-2.6-omap-h63xx.git/commit
V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-T
authorAntti Palosaari <crope@iki.fi>
Sun, 5 Nov 2006 19:05:38 +0000 (16:05 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 21 Feb 2007 15:35:30 +0000 (13:35 -0200)
commit5decdd2729066c5c155d0f6e7fdf89b844fbfc27
tree8f5fcf1db45402f7c4247cb34aa9802a891fffb7
parent4131fd4fd40aa22cfe61b4e7c78e640b9fcfcd8c
V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-T

This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based
on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353)
demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar
as used in MSI Megasky GL861.
Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is
also supported by hw but I cannot test it due to lack of USB 1.1 port. Device
supports only isochronous mode transfers. There is also eeprom in usb
controller(at least in address range 0x80 - 0xbf) for storing data, eg.
firmware. Anyway, firmware loading is not used / required by the device.
There seems to be at least one unknown I2C device in address 0xa0, probably
remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07
from this unknown address.
Driver is based on gl861 module. Tuner has a lot of problems to lock with
megasky qt1010 module with this hardware with some broadcasting standards.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/dvb-usb/Kconfig
drivers/media/dvb/dvb-usb/Makefile
drivers/media/dvb/dvb-usb/au6610.c [new file with mode: 0644]
drivers/media/dvb/dvb-usb/au6610.h [new file with mode: 0644]
drivers/media/dvb/dvb-usb/dvb-usb-ids.h