]> pilppa.com Git - linux-2.6-omap-h63xx.git/commit
USB: Driver for Freescale QUICC Engine USB Host Controller
authorAnton Vorontsov <avorontsov@ru.mvista.com>
Sat, 10 Jan 2009 02:03:21 +0000 (05:03 +0300)
committerGreg Kroah-Hartman <gregkh@kvm.kroah.org>
Wed, 28 Jan 2009 00:15:38 +0000 (16:15 -0800)
commit236dd4d18f293e3c9798f35c08272196826a980d
tree5e8f7dc48318e82c34758c1a807d034034b96221
parentfc91be2ad03e0d243418414a854665274d560ca2
USB: Driver for Freescale QUICC Engine USB Host Controller

This patch adds support for the FHCI USB controller, as found
in the Freescale MPC836x and MPC832x processors. It can support
Full or Low speed modes.

Quite a lot the hardware is doing by itself (SOF generation, CRC
generation and checking), though scheduling and retransmission is on
software's shoulders.

This controller does not integrate the root hub, so this driver also
fakes one-port hub. External hub is required to support more than
one device.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/Makefile
drivers/usb/host/Kconfig
drivers/usb/host/Makefile
drivers/usb/host/fhci-dbg.c [new file with mode: 0644]
drivers/usb/host/fhci-hcd.c [new file with mode: 0644]
drivers/usb/host/fhci-hub.c [new file with mode: 0644]
drivers/usb/host/fhci-mem.c [new file with mode: 0644]
drivers/usb/host/fhci-q.c [new file with mode: 0644]
drivers/usb/host/fhci-sched.c [new file with mode: 0644]
drivers/usb/host/fhci-tds.c [new file with mode: 0644]
drivers/usb/host/fhci.h [new file with mode: 0644]